Maintenance
113
f
Select Start Adjustments, and then
press the
button. When the
message is displayed, press the
button again.
Adjustments start. Adjustments are
performed in four corners starting from the
top-left corner.
c
The image may become distorted
while adjusting. The image is
restored once adjustments are
complete.
g
Use the , , , and
buttons to make adjustments, and
then press the
button to move to
the next adjustment point.
h
When you have adjusted all four
corners, select Exit, and then press the
button.
If you feel you still need to make
adjustments after correcting all four points,
select Select intersection and adjust and
then continue making adjustments.
To Next Page
Loading...
Need help?
General
