Epson EH-TW8300 User Manual

Useful Functions
61
Switching the target image
You can switch between a monitor device, such as a television, connected to the HDMI Out port on the
WirelessHD Transmitter and the projector.
a
Turn on the projector or the monitor device, such as a television.
b
Turn on the WirelessHD Transmitter.
The On/Standby indicator on the WirelessHD Transmitter turns on.
c
Point the remote control at the WirelessHD Transmitter, and then press the button
on the remote control or the
button on the WirelessHD Transmitter.
Remote control WirelessHD Transmit-
ter
Depending on the output target, the indicators on the WirelessHD Transmitter indicate the following
status. The output target projected last time is projected the next time the projector is turned on.
WiHD indicator On: The image is being output to the projector.
TV indicator On: The image is being output to the monitor device.

Epson EH-TW8300 Specifications

General

Brand	Epson
Model	EH-TW8300
Category	Projector
Language	English