Useful Functions
46
Indicators Status
Flashing red quickly twice; repeated 5
times
Weak battery
Lit red Charging
Lit green Charging completed
Flashes green and red in turn Pairing
Lit green for 10 seconds and then turns
off
Power on or pairing succeeded
Converting 2D Images to 3D
You can convert 2D images from HDMI1, HDMI2, or WirelessHD (EH-TW9300W/EH-TW8300W only) to 3D.
a
Press the button to display
menus in the order Signal - 3D Setup.
b
Set 3D Display to Auto.
c
Select 2D-to-3D Conversion, and
then press the
button to confirm
the selection.
d
Select the strength of the 3D effect,
and then press the
button to
confirm the selection.
c
If Image Processing is set to Fast, you cannot adjust 2D-to-3D Conversion.
s
Signal - Advanced -
Image Processing p.78
To Next Page
Loading...
Need help?
General
