To Next Page

To Previous Page

Adjusting the Image

Function Explanation

Load Memory

Loads the saved memory. When you select a memory and press the

button, the settings applied to the current image are replaced with the

settings from the memory.

Erase Memory

Erases the registered memory. When you select a memory name and press

the

button, a message is displayed. Select Yes, and then press the

button to erase the selected memory.

Rename Memory

Changes the memory name. Select the memory name you want to

change, and then press the

button. Enter the memory name using

the soft keyboard.

s p.87

When you have finished, move the cursor over Finish, and then press the

button.

Load Lens Position

Loads the registered lens position memory. When you select the lens po-

sition name and press the

button, the adjustment value for the se-

lected lens position memory is applied.

Erase Lens Position

Erases the registered lens position memory. When you select a lens posi-

tion name and press the

button, a message is displayed. Select Yes,

and then press the

button to erase the selected lens position memory.

Rename Lens Position

Changes the lens position memory name. Select the lens position memory

name you want to change, and then press the

button. Enter the lens

position memory name using the soft keyboard.

s p.87

When you have finished, move the cursor over Finish, and then press the

button.

Epson EH-TW8300 User Manual

Questions and Answers: