Installation Method
17
d
Only when mounting on a wall, use the two M8 x 16 mm bolts supplied to secure the
projector in place
Adjusting the position of the image
Project an image and adjust the position.
Connect the power cable to the projector in advance and turn it on.
Adjusting the vertical position of the image
You can tilt the projector to adjust the vertical position of the image.
c
•
You can also adjust the vertical position of the image by using the projector’s lens shift function. See
the User's Guide supplied with the projector you are using for details on making adjustments.
•
If you are concerned about image distortion caused by tilting the projector, you can use the projector's
image correction functions to correct the image. See the User's Guide supplied with the projector you
are using for more details.
To Next Page
Loading...
Need help?
General
