Introduction
5
Caution
Do not disassemble or remodel this product.
Install the product in a location free from humidity and dust to prevent the projector's lens
and optical components from becoming dirty.
Do not use excessive force when adjusting this product.
This product may break, resulting in personal injury.
Notes on the Installation Location
Warning
Do not install in a location subject to oily smoke or smoke for events.
If oils and so on stick to the slide plate fixing part of the projector, the case may crack and cause
the projector to fall, resulting in personal injury or property damage.
Caution
Do not install the product in a location where the operating temperature of the projector
might be exceeded.
Otherwise, damage may result. See the User's Guide supplied with the projector for the operating
temperature range.
Make sure there is enough space around the projector.
See the User's Guide supplied with the projector for the necessary space required.
Install the projector at a place away from other electric devices such as fluorescent lights
or air conditioning.
Some types of fluorescent lights could interfere with the remote control.
To Next Page
Loading...
Need help?
General
