Epson ELPMB67 User Manual

Introduction
7
Part Name Application
Safety wire set (for projector installa-
tion)
•
Safety wire (x1)
•
Carabiner (x1)
•
Wire ring (x1)
•
M6 x 15 mm bolt (x1)
Connect this product to
the projector to prevent
the projector from fall-
ing.
Warning
Do not attach the
wire ring to a projec-
tor that does not
have a dedicated
wire ring attachment
section.
Attaching it to a lo-
cation other than the
wire ring attachment
section may cause
the projector to fall
and cause personal
injury or an accident.
•
Use only the supplied bolts to install the mount. Do not substitute these bolts with any other types.
•
Gather the tools and parts you need before you begin installation.
ELPFP15
Part Name Application
A: Ceiling mount pipe
B: Adjustment pipe
c
Temporarily assembled
at the time of purchase.
See the illustration on
the left to separate the
parts before installing.
-
Veneer plate Install this to make the gap be-
tween the hole in the installa-
tion surface and the Suspen-
sion Adapter less noticeable.
M6 x 16 mm hexagon socket head
cap bolts
with washers (x3)
Used to attach the adjustment
pipe to the ceiling plate for the
ELPMB67.

Epson ELPMB67 Specifications

General

Brand	Epson
Model	ELPMB67
Category	Projector
Language	English