Connecting to a Projector on a Network and Projecting
17
When The Target Projector is Not Found
Action 1. Restart the computer.
Action 2. Check if the projector network settings are set to "Quick
Connection Mode". s User’s Guide "Network Menu (EMP-
1825 Only)"
Action 3. Check the following if actions 1 and 2 do not help. (If it is
disconnected, check the following.)
Switch toolbar display
The toolbar display is switched as follows. The toolbar display remains
as is until next switched.
Simple
Normal
Full
Is the indicator on the
wireless LAN unit
flashing?
Reinstall the wireless LAN
unit.
Are you using
commercially available
firewall software?
Create a firewall exception
for EMP NS Connection in
the firewall software you are
using.
Are any of the supplied
utilities operating from
the computer's wireless
LAN unit?
Close the utility and restart
EMP NS Connection.
Contact your local dealer or the
nearest address provided in the
Support and Service Guide.
s
Epson Projector Contact List
Not flashing
Flashing
Yes
No
Yes
No
To Next Page
Loading...
