58
Projecting Scenarios
This section describes the method for playing scenarios stored in a
USB storage device or a CompactFlash card, and the operations
during scenario playback.
Creating and Editing a Scenario
Create the scenario beforehand by using EMP SlideMaker2, and then
transfer it to the CompactFlash card or USB storage device in the
projector by using the "Send Scenario" function. s p.77
f Basic scenario editing
For a scenario stored on a USB storage device or a CompactFlash card, it
is possible to change the order in which images are projected, or set
display/non-display of the individual images.
A
Tilt the [h] button to move the cursor to the icon for
the scenario to be edited, and then press the [Esc]
button.
B
Select "Edit Scenario" from the menu displayed, then
press the [Enter] button.
C
Position the cursor to the desired slide, and then
press the [Esc] button.
The sub menu is displayed.
Select "Move Files" to change the order of the slides, and "Show/
Hide" to show or to hide files, then press the [Enter] button.
Go to step 4 when you select "Move Files".
Go to step 5 when you select "Show/Hide".
q
While transferring the scenario you can set autorun and
continuous play.
s
p.77
Procedure
To Next Page
Loading...
