Epson EMP-1825 - User Manual

Questions and Answers

U
upadillaAug 22, 2025
What to do if I get an error message when starting up Epson EMP NS Connection?
- K
  Kristen ContrerasAug 22, 2025
  If you receive an error message when starting EMP NS Connection, it could be due to several reasons: * The connection to the projector may have failed; try connecting again. * The keyword might be incorrect; verify the projector's keyword on the EasyMP screen and enter it correctly. * The selected projector may be busy; click the "Yes" button to connect to the projector. * EMP NS Connection may have failed to reset; restart EMP NS Connection. * The keyword may be wrong; check the keyword displayed on the projector's connection standby screen.
G
Gloria BrowningAug 25, 2025
Why does my Epson EMP-1825 Projector suddenly change to the EasyMP screen?
- E
  Eddie DanielAug 25, 2025
  Your Epson Projector might suddenly change to the EasyMP screen due to: * Failure to start EasyMP; try turning the projector off and then back on again. * Failure to process EasyMP; if using EMP NS Connection, reconnect it, or if using USB display, reconnect the USB cable. * Communication cut off from the access point; check the access point operation. * Unstable wireless communication; check network traffic and reconnect EMP NS Connection after waiting.
J
Jennifer FernandezAug 26, 2025
How to fix connection issues in 'Advanced Connection Mode' or wired LAN connection on my Epson EMP-1825 Projector?
- A
  ana60Aug 26, 2025
  If you are experiencing connection issues in 'Advanced Connection Mode' or wired LAN connection, consider the following: * Ensure the SSID setting is the same across the computer, access point, and projector; set them to the same SSID. * Verify that the same WEP key is set when selecting WEP from "Security" on the access point, computer, and projector. * Check the connection denial functions at the access point; ensure the projector is allowed to connect. * Confirm that the IP address, subnet mask, and gateway address are correctly set for the access point and projector, especially when not using DHCP; adjust each setting accordingly. * If the access point and projector's subnets are different, select "Manual search" from EMP NS Connection and specify the IP address.
J
Julia Snyder MDAug 29, 2025
What to do if I cannot start a PowerPoint Slide show when connected using Epson EMP NS Connection?
- J
  johnporterAug 30, 2025
  If a PowerPoint Slide show cannot be started when a connection is made using EMP NS Connection, ensure that you close PowerPoint first, as EMP NS Connection may have been started while PowerPoint was starting.
K
Kelly CarterSep 1, 2025
Why is the Epson EMP NS Connection not refreshing the screen when running an Office application?
- C
  Cynthia JacksonSep 1, 2025
  If the screen does not refresh when running an Office application while connected through EMP NS Connection, it might be because the mouse is not moved continuously. The screen updates when you stop moving the mouse cursor.
K
Kimberly HarringtonSep 2, 2025
How do I resolve the 'Failed to acquire network adapter information' error on my Epson EMP-1825 Projector?
- N
  Nicholas TurnerSep 3, 2025
  If you encounter the error 'Failed to acquire network adapter information,' it may be because a network adapter is not installed on the computer, or the driver for the network adapter used is not installed. Verify that a network adapter is installed and that the correct driver is installed.
T
travis94Sep 5, 2025
How to fix the issue when the Slide show cannot be displayed on the desired display when using the multi-screen display on Epson?
- N
  nrileySep 5, 2025
  If the Slide show cannot be displayed on the desired display when using the multi-screen display, it may be because you are using PowerPoint 2002 or an earlier version. To set and use two or more virtual displays, use PowerPoint 2003, or limit the number of virtual displays to one before displaying the Slide show.
D
Diana LawrenceSep 6, 2025
What to do if applications are no longer displayed from the computer's screen when using the multi-screen display on Epson EMP-1825 Projector?
- J
  Jennifer SchneiderSep 7, 2025
  If applications are no longer displayed from the computer's screen when using the multi-screen display, it may be because another application is running on the virtual display. Set "EPSON Virtual Display" to "Off" at "Screen properties."
M
Marissa MckaySep 9, 2025
How to restore the mouse cursor on the computer's screen when using Epson Virtual Display?
- C
  Courtney AtkinsSep 9, 2025
  If the mouse cursor is not displayed on the computer's screen, it may be because EPSON Virtual Display is installed. Clear the virtual display check box on the "Add-Remove EPSON Virtual Display" screen to return the mouse pointer to the screen display area.
L
Laura BrownSep 12, 2025
What causes the Epson EMP NS Connection to not make a connection?
- B
  Brianna CarterSep 12, 2025
  You might be using an old version of EMP NS Connection. A connection cannot be made. Install the current version from the EPSON Projector Software for Meeting & Presentation CD-ROM supplied with the projector.