12
Using the Remote Control
Aim the remote control at the screen and press any button. An icon appears on the remote control’s LCD
screen to indicate that a command is being transmitted. At the same time, the blue light at the top of the
projection screen flashes, indicating that the system is receiving a command.
Note
The blue light remains on when the screen is raised and turns off when the screen is lowered.
If you’re using the remote control in a darkened room, press the LIGHT button on the side of the remote
control. The keys and display screen on the remote control light up so you can make a selection. The light
shuts off by itself after 10 seconds, or you can turn it off by pressing the
LIGHT button a second time.
Note
If you need to increase the amount of time the remote control lights up or change the contrast of its screen, see page 71.
Blue light
LIGHT button
(on side of remote control)
To Next Page
Loading...
