32
Connecting Video Equipment
You can connect up to five pieces of video equipment at the same time, using any of the commercially available
cables shown below:
Check your video device for the type of output port(s) it has available. For best picture quality, use the HDMI
(High-Definition Multimedia Interface) port. If your equipment doesn’t support HDMI, use one of the
following ports (highest quality listed first): component video, S-video, or composite video (yellow RCA-style
connector).
Connect the cable from your video component to any available port on the back of the AV controller, as shown
below:
Caution
Avoid connecting or disconnecting any components with your equipment turned on.
Port Cable
HDMI 1 or 2 HDMI cable
Component Component video cable
Note
When connecting the cable, match the colors of its connectors to the colors of the
ports where you’re plugging them in.
S-Video S-video cable
CVBS (composite video) Composite video cable (RCA cable)
Pr Pb Y
HDMI audio/video portsS-video port Component
video port
CVBS (composite
video) port
To Next Page
Loading...
