Epson Ensemble HD - Adjusting the Sound, Picture, and Other Settings; Using the On-Screen Menu System

41
Adjusting the Sound, Picture, and Other
Settings
You can use the menu system described in this chapter to adjust the sound, picture, and other settings. See
these sections:
• “Using the On-screen Menu System” below
• “Adjusting the Picture” on page 42
• “Adjusting the Sound” on page 46
• “Using Other Features” on page 49
• “Restoring Factory Defaults” on page 51
Using the On-screen Menu System
Follow these guidelines when using the on-screen menu system.
1 Make sure the MAIN menu is displayed on the remote control.
Note
The MAIN menu must be displayed, or you won’t be able to open the Ensemble HD menu by pressing the MENU
button. If another component’s page is displayed instead, its menu screen will open when you press the
MENU
button.
2 Point the remote control at the screen and press the MENU button. You see
the Ensemble HD menu, as shown below.
Note
When you open the menu, it displays the last screen you used.
Move
Enter
Exit
Menu
Sel
Video
Language
Preference
Audio
Reset
Audio
Voice
Bass
Treble
Surround
Front Distance
Center Distance
Rear Distance
Test Tone
0 dB
0 dB
0 dB
0 dB
5 ft.
5 ft.
5 ft.
Settings
Legend
Main options