Epson Ensemble HD - Using Parental Controls

50
Using Parental Controls
You can control access to rated DVDs to prevent children from viewing unsuitable content. To set up parental
controls, you’ll need to create a 4-digit numeric password.
Note
The parental controls cannot be used to prevent viewing of unrated DVDs.
To set up parental controls, follow these steps:
1 Make sure the MAIN menu is displayed on the remote control. Press the
Menu button, select Preference,
then select
Parental Control. You see this screen:
2 Select the DVD option on the remote control. (You must be in DVD mode to use the numeric keypad, as
required in step 3.)
3 Enter your parental controls password. If this is your first time using the parental controls, enter the default
password
1234.
You see this screen:
4 If this is your first time using the parental controls, select
Enter new Password. Use the numeric keypad
on the remote control to create a 4-digit numeric password. Confirm the password by re-entering it on the
next screen.
Note
Be sure to write down the password and keep it in a safe place. You’ll need the password if you want to change the
parental control settings in the future.
0 - 9 Number
Exit
Menu
[Parental Control]
Enter Password
- - - -
- - - -
ESC
Return
[Parental Control]
Enter new Password
Max. allowable rating None
Return to Preference menu
Exit
Menu
Enter
Sel
Move
Enter new Password
Exit
Menu
ESC
Return