35
5 In the left-hand column (under Video Input), locate the name of the port to which you’ve connected the
video cable for your equipment.
6 In the middle column of the same row (under
Label), select the type of device you’ve connected. If you’ve
connected a device not listed below, select an unused name such as
AUX. You can select from these labels:
Note
You can’t select the same label for different inputs. If the label you want is currently selected on another unused
input, change the label on the unused input to free up that label.
7 In the right-hand column of the same row (under Audio Input), select the name of the port to which
you’ve connected the audio cable.
For example: If you connected a cable box to the HDMI1 port and the cable box supports HDMI audio,
select
HDMI1 in the Audio Input column. Or if you connected to the S-Video port, select Coax, Optical,
or
Analog in the Audio Input column, depending on the port to which you connected the audio cable.
Note
Make sure you don’t select the same audio input for different video inputs.
8 When you’re done changing the settings, press the MENU button to exit the menu system.
Note
When you’re viewing a particular source, you can press the OSD (On-Screen Display) button to display information about
the source.
Label (device name) Description
CABLE Cable box
SAT Satellite receiver
HD High-definition DVD player, such as Blu-ray or HD DVD
DVR Digital video recorder (for example, TiVo)
AUX Video game console
VIDEO Video cassette recorder
To Next Page
Loading...
