76
The top of screen displays EDIT, as shown at right, and you see a list of devices
(DVD, CABLE, SAT, etc.).
4 Do one of the following:
• To edit an existing command, select the device that has the command in
its menu that you want to edit, then select the command. If necessary,
press the
PAGE button to display the second page of devices.
Note
If you can’t open a device menu, continue pressing PAGE until the top of the screen displays EDIT and you
see the device name you want.
• To add a command to a blank row, first select the device that has the blank row in its menu that you
want to edit, as described above. Then press the
PAGE button until the last page of commands is
displayed with the blank row where you want to add text. Press the button to the right of that row.
Note
If there are no blank rows, you can add a new blank page as described in “Adding or Hiding Pages” on
page 78.
• To edit a device name, press the PAGE button until the top of the screen displays MAIN and you
see the page that has the name of the device you want to edit, then select the device.
The cursor flashes at the first character point in the line of text:
5 Use the l or r button to change the cursor position.
To delete a character, press d. To delete all characters, press u.
EDIT
DVD
CABLE
SAT
HD
RADIO
1 OF 2
DVD
MENU
AUDIO
EJECT
ANGLE
A<>B
Flashing cursor
To Next Page
Loading...
