Epson EPL-5500 - Removal of the Controller Section; Main Board (C169 MAIN-B Board) Removal

3.2.2 Removal of the Controller Section
The control section is comprised of the controller board (the C169 MAIN-B Board).
3.2.1.1 Main Board (C169 MAIN-B Board) Removal
CAUTION
Before you remove the video controller board, make sure that you remove any optional
LocalTalk/ serial board or Type-B EX box.
1. Turn the printer so that its right side faces you.
2. Remove the right cover.
3. Remove 2 screws (#3), and then remove the shield case.
4. Disconnect all connectors on the C169 MAIN-B Board.
5. Remove the 5 screws (#4) for the C169 MAIN-B Board.
6. Remove the C169 MAIN-B Board.
Figure 3-2. Removing the Shield Case
Figure 3-3. Removing the C169 MAIN-B Board
EPL-5500 Service Manual Disassembly and Assembly
Rev. B 3-5