REV.-A
Flowchart (2) carriage operation abnormal
START
CN3, 4, 5, 6, 7, 8, 9, and 13
connecting the BOARD
ASSY.,
C094
MAI
Secure the connectors.
and the printer mechanism
Yes
problem corrected?
coil resistance correct
(5 ohms +/- 7
‘%.
at room
v
Replace the BOARD
ASSY,,
C094
MAIN.
*
END
problem corrected?
v
Refer to Section 5.5,
Repairing the Printer
Mechanism.
*
END
Note: If any coils in the CR motor are shorted, also test the
motor drivers on the BOARD
ASSY.,
C094
MAIN.
5-6
To Next Page
Loading...
