Epson FX 1170 - B/W Dot-matrix Printer - Removing the Front and

REV.-A
3.2.5.10 Removing the Front and Rear Paper End (PE) DETECTORS
[STEP 11
[STEP 2]
[STEP 3]
[STEP 4]
[STEp 51
[STEP 61
[STEP 71
[STEP 81
Remove the PAPER GUIDE ASSEMBLY, top cover, front cover, paper eject cover, and tractor unit.
(See Section 3.2.1.)
Remove the PANEL UNIT. (SeeSection 3.2.2.)
Remove the HOUSING ASSEMBLY, UPPER. (See Section 3.2.4.)
Remove the PRINTER MECHANISM. (See Section 3.2.5.) I
Remove the PLATEN ASSEMBLY. (See Section 3.2.5.1.)
Remove the FRAME ASSEMBLY, REAR. (See Section 3.2.5.2.)
Remove the clip for each DETECTOR, PE mounted on the PAPER GUIDE ASSEMBLY, REAR.
Remove the DETECTOR,
PE, FRONT and DETECTOR, PE, REAR.
Remove the LEAD from each DETECTOR,
PE.
Figure 3-20. Removing tha DETECTORS, PE
3-19