Epson FX 1170 - B/W Dot-matrix Printer - Removing the DETECTOR, RELEASE

REV.-A
3.2.5.11 Removing the DETECTOR, RELEASE
[STEP 11
[STEP 21
[STEP 31
[STEP 41
[STEp 51
[STEP 6]
[STEp 71
[STEP 81
Remove the PAPER GUIDE ASSEMBLY, top cover, front cover, paper eject cover, and tractor unit.
(See Section 3.2.1.)
Remove the PANEL UNIT. (See Section 3.2.2.)
Remove the HOUSING ASSEMBLY, UPPER. (See Section 3.2.4.)
Remove the PRINTER MECHANISM. (See Section 3.2.5.)
Remove the PLATEN ASSEMBLY. (See Section 3.2.5.1.)
Remove the FRAME ASSEMBLY, REAR. (See Section 3.2.5.2)
Remove the two clips of the DETECTOR, RELEASE mounted on the PAPER GUIDE ASSEMBLY,
REAR. Remove the DETECTOR, RELEASE.
Disconnect the LEAD, RELEASE from the detector.
.’
.+
L“
Figure 3-21. Removing the DETECTOR, RELEASE
-.7+
E
7.-
. . .
3-20