Epson FX 1170 - B/W Dot-matrix Printer - Removing the Ribbon Drive (RD) ASSEMBLY

REV.-A
3.2.5.7 Removing the Ribbon Drive (RD) ASSEMBLY
[STEP 11
[STEP 21
[STEP 31
[STEP 41
[STEP 51
[STEP 61
[STEP 71
[STEP 81
[STEP 91
[STEP 101
Remove the PAPER GUIDE ASSEMBLY, top cover, front cover, paper eject cover and tractor unit.
(See Section 3.2.1.)
Remove the PANEL UNIT. (See Section 3.2.2.)
Remove the HOUSING ASSEMBLY, UPPER. (See Section 3.2.4.)
Remove the PRINTER MECHANISM. (See Section 3.2.5.)
Remove the PLATEN ASSEMBLY. (See Section 3.2.5.1.)
Remove the
LEIT FRAME of the PRINTER MECHANISM. (See Section 3.2.5.2.)
Disengage the TIMING BELT from the MOTOR ASSEMBLY, CR. (See Section 3.2.5.3.)
Remove the CARRIAGE GUIDE ASSEMBLY. (See Section 3.2.5.7.)
Remove the
CBC (M3X8) screw and the CBB (M3X8) screw securing the RD ASSEMBLY.
Remove the
RD ASSEMBLY.
w’
CBC (M3X8)
/ RD ASSEMBLY
t
FRAME ASSEMBLY, FRONT
\
Figure 3-17. Removing the RD ASSEMBLY
3-17