Default Value of the Administrator Password
e default value of the administrator password is printed on the label on the product itself, such as the one shown.
e position where the label is attached depends on the product, such as the side where the cover is opened, the
back, or the bottom.
e following illustration is an example of the label attachment position on the side of the printer where the cover
opens.
If both labels (1) and (2) are attached, the value next to PASSWORD written on the label in (1) is the default value.
In this example, the default value is 03212791.
If only label (2) is attached, the serial number printed on the label in (2) is the default value. In this example, the
default value is X3B8153559.
Changing the Administrator Password
It can be changed from the printer control panel and Web Cong. When changing the password, set it with at least
8 single-byte alphanumerical characters and symbols.
Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 210
Operations that Require You to Enter the Administrator Password
If you are prompted to enter the administrator password when performing the following operations, enter the
administrator password set on the printer.
❏ When updating the rmware of the printer from a computer or smart device
❏ When logging on to the advanced settings of Web
Cong
❏ When setting using an application, such as Fax Utility, that can change the printer's settings.
Initializing the Administrator Password
You can return the administrator password to the default settings by initializing the network settings.
Important Instructions
>
Printer Advisories and Warnings
>
Notes on the Administrator Password
16
To Next Page
Loading...
Need help?
General
