Epson L3560 Series

Borderless is not set in the print settings.
Solutions
Select Copy > More > Print Settings > Settings > Borderless Copy on the control panel. If you select a
paper that does not support borderless printing, you cannot enable borderless settings. Select a paper type
that supports borderless printing.
& “Paper for Borderless Printing” on page 204
Edges of the Image are Cropped During Borderless Copying
Because the image is slightly enlarged, the protruding area is cropped.
Solutions
Select a smaller enlargement setting.
Select Copy > More > Print Settings > Settings > Borderless Copy, and change the Expansion setting.
The Position, Size, or Margins of the Copies are Incorrect
e following causes can be considered.
The paper is loaded incorrectly.
Solutions
Load paper in the correct direction, and slide the edge guide against the edge of the paper.
& “Loading Paper in the Rear Paper Feeder” on page 31
The originals are not placed correctly.
Solutions
❏ Make sure the original is placed correctly against the alignment marks.
Solving Problems > Printing, Copying, Scanning, and Faxing Quality is Poor > Copy Quality is Poor
170