Epson L3560 Series

2. Slide the edge guides.
3. Load paper at the center of the paper support with the printable side facing up.
c
Important:
❏ Do not load more than the maximum number of sheets specied for the paper. For plain paper, do not load
above the line just under the
d symbol inside the edge guide.
❏ Load paper short edge rst. However, when you have set the long edge as the width of the user dened size,
load paper long edge
rst.
4. Slide the edge guides to the edges of the paper.
ET-2840 Series/L3560 Series: Close the feeder guard aer sliding the edge guides.
c
Important:
ET-2840 Series/L3560 Series: Do not place objects on the feeder guard. Doing so may prevent paper from
feeding.
5. Select the paper size and paper type.
Loading Paper > Loading Papers > Loading Paper in the Rear Paper Feeder
32