Epson L395

To Next Page

To Previous Page

Changing a USB Connection to a Wi-Fi Connection

If you have already connected your product to your computer using a USB connection, you can change

to a Wi-Fi connection.

1. Disconnect the USB cable from your product.

2. Uninstall your product software.

3. Download and install your product software from the Epson website using the instructions on the

Start Here sheet.

Parent topic: Changing or Updating Network Connections

Related concepts

Uninstall Your Product Software

Related tasks

Resetting Network Settings

Connecting to a New Wi-Fi Router

If you change the wireless router you have been using on your network, you need to update your

product's Wi-Fi connection to the new router.

Note: If you switch to a 5 GHz wireless router, set the router to operate in dual band (2.4 GHz and

5 GHz) mode. See your router documentation for instructions.

1. Do one of the following:

• Windows: Uninstall your product software.

• Mac: Go to the next step.