F
Check that the ADF light in the control panel is on.
Note:
❏ The ADF light may stay off if there is any other original on the scanner glass. If you press x in this case, the
original on the scanner glass will be copied, scanned, or faxed instead of the originals in the ADF.
❏ The ADF light will not turn on when the product is in sleep mode. Press any button other than P to recover from
sleep mode. It may take some time for the light to turn on after recovery from sleep mode.
❏ Be careful not to let any foreign object get inside the hole on the left front corner of the scanner glass. Doing so
may prevent the ADF from operating.
❏ When you use the copy function with the Automatic Document Feeder (ADF), the print settings are fixed at
Reduce/Enlarge - Actual Size, Paper Type - Plain Paper, and Paper Size - A4/Legal. The print is cropped if you
copy an original larger than A4/Legal.
Scanner glass
A
Open the document cover and place your original face-down on the scanner glass.
B
Slide the original to the corner.
Note:
See the following sections if any problems occur with the scanning area or the scanning direction when using EPSON
Scan.
& “The edges of your original are not scanned” on page 121
& “Multiple documents are scanned into a single file” on page 122
User’s Guide
Paper and Media Handling
24
To Next Page
Loading...
