Epson L550 - Sending a Fax at a Specified Time

A
Place your original(s) in the Automatic Document Feeder or on the scanner glass.
& “Placing Originals” on page 22
B
Press K to enter the fax mode.
C
Press .
Note:
Each press of
switches between the speed dial list and group dial list.
D
Select the entry number to send. Use u or d to select an entry, and press OK.
You will be prompted to add another number. You can add another number by manually entering the number
or using the speed dial or group dial.
Note:
You can change fax quality and contrast settings. When finished, press x again to return to the fax mode top
screen.
Press x and select Quality or Contrast.
E
Press one of the x buttons to start sending.
Sending a fax at a specified time
Follow the instructions below to send a fax at a specified time.
Note:
❏ Make sure you have set the time correctly.
& “Setting/Changing Time and Region” on page 87
❏ You can only send B&W faxes.
A
Place your original(s) in the Automatic Document Feeder or on the scanner glass.
& “Placing Originals” on page 22
B
Press K to enter the fax mode.
C
Enter a fax number. You can also use redial, speed dial, or group dial lists to select fax number.
D
Press x to display the menus.
E
Select Send Fax Later. Use u or d to select the menu, and press OK.
User’s Guide
Faxing
68