Epson L550 - Using the Power Ink Flushing Utility for Mac os X; Using the Control Panel

Using the Power Ink Flushing utility for Mac OS X
Follow the steps below to use the Power Ink Flushing utility.
A
Make sure that the transportation lock is set to the unlocked (Printing) position.
B
Make sure that no warnings or errors are indicated in the control panel.
C
Access the Epson Printer Utility 4.
& “Accessing the printer driver for Mac OS X” on page 30
D
Click the Power Ink Flushing icon.
E
Follow the on-screen instructions.
Using the control panel
Follow the steps below to use the Power Ink Flushing function.
Note:
You need to turn off the product in the following procedure. The data temporarily stored in product memory will be deleted
by turning the power off.
& “Notices when the power is turned off” on page 64
The Power Ink Flushing utility can be used without turning the power off.
& “Using the Power Ink Flushing utility for Windows” on page 88
& “Using the Power Ink Flushing utility for Mac OS X” on page 89
A
Make sure that the transportation lock is set to the unlocked (Printing) position.
B
Make sure that no warnings or errors are indicated in the control panel.
C
Turn off the product.
D
While holding down r and y, press P to turn on the product.
E
When the product turns on, release both the buttons.
F
Follow the instructions in the LCD screen.
User’s Guide
Maintaining Your Product and Software
89