Epson L550 - Creating Header Information

B
Press x to display the menus.
C
Select the menu shown below. Use u or d to select a menu, and press OK.
Select Fax Settings > Group Dial Setup.
D
Select Create. You see the available group dial entry numbers.
E
Select the group dial entry number that you want to register. Use u or d to select a number, and press OK.
F
Enter a name to identify the group dial entry. You can enter up to 30 characters.
Press OK to register the name.
G
Select a speed dial entry that you want to register in the group dial list. Use u or d to select the entry and do the
following to add it to the group.
Press
. When you want to cancel the selection, press again.
H
Repeat step 7 to add other speed dial entries to the group dial list. You can register up to 30 speed dial entries in a
group dial.
I
Press OK to finish creating a group dial list.
Creating header information
You can create a fax header by adding information such as your phone number or name.
Note:
Make sure you have set the time correctly.
& “Setting/Changing Time and Region” on page 87
A
Press K to enter the fax mode.
B
Press x to display the menus.
C
Select the menu shown below. Use u or d to select a menu, and press OK.
Select Fax Settings > Header > Fax Header.
D
Enter the header information. You can enter up to 40 characters.
Press OK to register the name.
E
Press d to select Your Phone Number and press OK.
User’s Guide
Faxing
66