G
Unhook the ink tank unit from the product and lay it down, and then make sure to install the cap onto the ink
tank securely.
H
Install the covers that came with your product over the protruding parts of the ink tank, and then hook the ink
tank unit onto the product.
I
Repack the product in the box, using the protective materials that came with it.
c
Important:
❏ Keep the product level during transport. Otherwise, ink may leak.
❏ After you move it, remove the tape securing the print head and the covers of ink tanks, then set the transportation
lock to the unlocked (Printing) position. If you notice a decline in print quality, run a cleaning cycle or align the
print head.
❏ Do not put opened ink bottles in the box with product.
User’s Guide
Maintaining Your Product and Software
94
To Next Page
Loading...
