Epson L7160 Series - Page 122

6. Insert the top of the ink bottle securely into the lling port of the tank to rell the tank with ink.
Ink pours into the tank just by holding the bottle normally without squeezing.
e
ink
ow
stops
automatically when the ink is lled to the upper line.
Note:
If the ink does not start owing into the tank, remove the ink bottle and try reinserting it.
7. When you have nished relling the ink, remove the ink bottle, and then close the cap of the ink tank securely.
c
Important:
Do not leave the ink bottle inserted; otherwise the bottle may be damaged or ink may leak.
Note:
If any ink remains in the ink bottle, tighten the cap and store the bottle upright for later use.
User's Guide
Relling Ink and Replacing Maintenance Boxes
122