A
Rear paper feed slot ❏ You can load a single sheet of all types of supported paper.
❏ You can also load thick paper (up to 0.6 mm thick) and pre-punched
paper, which cannot be loaded in the paper cassette. However, even if the
thickness is within this range, some paper may not be fed correctly
depending on the hardness.
❏ Load paper when a message is displayed on the control panel telling you
to load paper.
B
Paper cassette 1 ❏ You can load multiple sheets of small size photo paper.
❏ If you load the same paper in paper cassette 1 and paper cassette 2 and
select Cassette 1>Cassette 2 as the Paper Source setting in the print
settings, the printer automatically feeds paper from paper cassette 2
when paper runs out in paper cassette 1.
C
Paper cassette 2 We recommend loading A4 size plain paper as this is used frequently.
Loading Paper in the Paper Cassette 1
1. When the output tray is ejected, check that there is no paper on the tray, and then close it by pushing it with
your hand.
2. Raise the control panel.
3. Open the front cover.
User's Guide
Loading Paper
41
To Next Page
Loading...
