Epson L7160 Series - Menu Options for Epson Connect Services

❏ Wi -F i Au to C onn e c t
Connects the printer to a wireless (Wi-Fi) network using a computer that is connected to the access
point. Insert the soware disc supplied with the printer into the computer, and then follow the on-
screen instructions. When you are prompted to operate the printer, run this menu.
❏ Disable Wi-Fi
Disables the connection by turning o the wireless signal without deleting the network information.
To enable the connection, set up the wireless (Wi-Fi) network again.
❏ Wi -F i Di re c t S e tu p
Connects the printer to a wireless (Wi-Fi) network without a wireless router.
Manual Network Setup:
Changes the network settings, such as the device name or TCP/IP.
Connection Check:
Checks the status of the network connection and prints the network connection report. If there are any
problems with the connection, see the report to solve the problem.
Related Information
&
“Checking the Network Connection Status” on page 28
&
“Making Wi-Fi Settings Manually” on page 24
& “Making Wi-Fi Settings by Push Button Setup” on page 25
& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 25
& “Disconnecting Wi-Fi Direct (Simple AP) connection from the Control Panel” on page 35
Menu Options for Epson Connect Services
Select the menus on the control panel as described below.
Settings > Epson Connect Services
Register/Delete:
Register or delete the printer to or from the Epson Connect services.
For usage guides, see the following portal website.
https://www.epsonconnect.com/
http://www.epsonconnect.eu (Europe only)
Suspend/Resume:
Select whether to suspend or resume Epson Connect services.
Email Address:
Check the printer's email address that is registered to the Epson Connect services.
Status:
Check whether or not the printer is registered and connected to the Epson Connect services.
User's Guide
Menu Options for Settings Mode
138