Edges of the Image are Cropped During Borderless Printing
During borderless printing, the image is slightly enlarged and the protruding area is cropped. Select a smaller
enlargement setting.
❏ Control panel
Change the Expansion setting.
❏ Wi n d o w s
Click Settings next to the Borderless checkbox on the printer driver's Main tab, and then change the settings.
❏ Mac OS
Change the Expansion setting from the print dialog's Print Settings menu.
Related Information
&
“Menu Options for Paper and Print Settings” on page 70
& “Menu Options for Copy Mode” on page 97
The Position, Size, or Margins of the Printout Are Incorrect
❏ Load paper in the correct direction, and slide the edge guides against the edges of the paper.
❏ When placing the originals on the scanner glass, align the corner of the original with the corner indicated by a
symbol on the frame of the scanner glass. If the edges of the copy are cropped o, move the original slightly
away from the corner.
❏ When placing the originals on the scanner glass, clean the scanner glass and the document cover. If there is dust
or stains on the glass, the copy area may extend to include the dust or stains, resulting in the wrong copying
position or small images.
❏ Select the appropriate paper size setting.
❏ Adjust the margin setting in the application so that it falls within the printable area.
Related Information
& “Loading Paper in the Paper Cassette 1” on page 41
& “Loading Paper in the Paper Cassette 2” on page 45
& “Loading Paper in the Rear Paper Feed Slot” on page 49
& “Cleaning the Scanner Glass” on page 132
& “Printable Area” on page 187
Multiple Originals are Copied onto a Single Sheet
When you place multiple originals on the scanner glass to copy them separately, but they are copied onto a single
sheet, place the originals at least 5 mm apart. If the problem continues, place one original at a time.
Related Information
& “Placing Photos for Copying” on page 54
User's Guide
Solving Problems
176
To Next Page
Loading...
