& “Printing a Network Connection Report” on page 29
& “Printing a Network Connection Report” on page 29
Suddenly the Printer Cannot Print Using a USB
Connection
❏ Disconnect the USB cable from the computer. Right-click on the printer icon displayed on the computer, and
then select Remove Device. Next, connect the USB cable to the computer and try a test print. If printing is
possible, the setup is complete.
❏ Re-set the USB connection following the steps in [Changing a Connection Method to a Computer] in this
manual.
Related Information
& “Changing the Connection Method to a Computer” on page 34
Cannot Print from an iPhone or iPad
❏ Connect the iPhone or iPad to the same network (SSID) as the printer.
❏ Enable Paper
Conguration
in the following menus.
Settings > Printer Setup > Paper Source Setting > Paper Conguration
❏ Enable the AirPrint setting on Web Cong.
Related Information
& “Connecting to a Smart Device” on page 23
& “Web Cong” on page 142
Printout Problems
Printout is Scued or Color is Missing
❏ If you have not used the printer for a long time, the print head nozzles may be clogged and ink drops may not
be discharged. Perform a nozzle check, and then clean the print head if any of the print head nozzles are
clogged.
❏ If you printed when the ink levels were too low to be seen in the ink tank windows,
rell
the ink tanks to the
upper lines and then use the Power Cleaning utility to replace the ink inside the ink tubes. Aer you use the
utility, perform a nozzle check to see if print quality has improved.
Related Information
& “Checking and Cleaning the Print Head” on page 127
& “Relling the Ink Tanks” on page 120
User's Guide
Solving Problems
170