Epson L7160 Series - Maintenance Box Code; Maintenance Box Handling Precautions

8. Close the ink tank cover rmly.
9. Close the scanner unit.
10.
Select the color of the ink you relled up to the upper line using the
l or r button, and then press the OK
button.
11.
Press the
x button to reset the ink level.
12.
Conrm the message, and then press the OK button.
c
Important:
If you continue to use the printer aer resetting the ink level without relling the ink tank to the upper line,
printing may be performed without ink and this may damage the printer. Before you start printing, make sure
you visually check the ink levels in all of the ink tanks.
Related Information
& “Ink Bottle Codes” on page 118
& “Ink Bottle Handling Precautions” on page 119
&
“Ink Spilled” on page 186
Maintenance Box Code
Epson recommends the use of a genuine Epson maintenance box.
e following is the code for the genuine Epson maintenance box.
T04D0
Maintenance Box Handling Precautions
Read the following instructions before replacing the maintenance box.
❏ Do not touch the green chip on the side of the maintenance box. Doing so may prevent normal operation and
printing.
User's Guide
Relling Ink and Replacing Maintenance Boxes
123