Epson L7160 Series - Moiré (Cross-Hatch) Patterns Appear in the Copied Image; An Image of the Reverse Side of the Original Appears in the Copied Image; The Printout Problem Could Not be Cleared; Other Printing Problems

❏ Clean the scanner glass.
❏ Do not press too hard on the original or the document cover when you are placing the originals on the scanner
glass.
❏ When the paper is smeared, lower the copy density setting.
Related Information
& “Cleaning the Paper Path for Ink Smears” on page 131
& “Cleaning the Scanner Glass” on page 132
& “Menu Options for Copy Mode” on page 97
Moiré (Cross-Hatch) Patterns Appear in the Copied Image
Change the reduce and enlarge setting or place the original at a slightly dierent angle.
Related Information
& “Menu Options for Copy Mode” on page 97
An Image of the Reverse Side of the Original Appears in the Copied
Image
❏ For a thin original, place the original on the scanner glass and then place a piece of black paper over it.
❏ Lower the copy density setting on the control panel.
Related Information
& “Menu Options for Copy Mode” on page 97
The Printout Problem Could Not be Cleared
If you have tried all of the solutions and have not solved the problem, try uninstalling and then reinstalling the
printer driver.
Related Information
& “Uninstalling Applications” on page 152
& “Installing Applications” on page 154
Other Printing Problems
Printing Is Too Slow
❏ Close any unnecessary applications.
User's Guide
Solving Problems
178