❏ Do not insert the CD/DVD tray until you are instructed to do so. Otherwise, an error occurs and the tray is
ejected.
Related Information
& “Printing Photos from a Memory Card onto a CD/DVD Label” on page 62
& “Copying on a CD/DVD Label” on page 101
Power and Control Panel Problems
Power Does Not Turn On
❏ Make sure the power cord is securely plugged in.
❏ Hold down the
P
button for a little longer.
Lights Came On and then Went Out
e printer's voltage may not match the outlet rating. Turn o the printer and unplug it immediately. en check
the label on the printer.
!
Caution:
If the voltage does not match, DO NOT PLUG YOUR PRINTER BACK IN. Contact your dealer.
Power Does Not Turn
O
Hold down the
P
button for a little longer. If you still cannot turn o the printer, unplug the power cord. To
prevent the print head from drying out, turn the printer back on and turn it
o
by pressing the
P
button.
Power Turns
O
Automatically
❏ Select Power
O
Settings in Printer Setup, and then disable the Power
O
If Inactive and Power
O
If
Disconnected settings.
❏ Disable the Power O Timer setting in Printer Setup.
Note:
Your product may have the Power O Settings or Power O Timer feature depending on the location of purchase.
Related Information
& “Menu Options for Printer Setup” on page 136
User's Guide
Solving Problems
164