A
Document cover Blocks external light while scanning.
B
Scanner glass Place the originals.
C
Scanner unit Scans placed originals. Open to rell the ink tank or to remove jammed
paper. This unit should usually be kept closed.
D
Memory card slot Insert a memory card.
E
External interface USB port Connects an external storage device or a PictBridge capable device.
A
AC inlet Connects the power cord.
B
Maintenance box cover Remove when replacing the maintenance box. The maintenance box is a
container that collects a very small amount of surplus ink during cleaning or
printing.
C
Rear cover Remove when removing jammed paper.
D
USB port Connects a USB cable to connect with a computer.
E
LAN port Connects a LAN cable.
Control Panel
You can change the angle of the control panel.
User's Guide
Printer Basics
17
To Next Page
Loading...
