7. Load a single sheet of paper at the center of the rear paper feed slot with the printable side facing up, and then
insert it approximately 5 cm into the printer.
When loading 10×15 cm (4×6 in.) size paper, align it with the paper size indicator on the paper support, and
the paper is inserted approximately 5 cm into the printer.
❏ Envelopes
❏ Pre-punched paper
Load a single sheet of
dened
size plain paper with binding holes at the
le
or right. Adjust the print
position of your le to avoid printing over the holes.
User's Guide
Loading Paper
51
To Next Page
Loading...
