Epson LQ-1170 - Page 82

REV.-A
3.2.5.14 Disassembling the Tractor Unit
1.
2.
3.
4.
5.
Remove the tractor unit from the printer.
Remove the cog (17 mm) from the tractor shaft.
Remove the right tractor frame from the tractor shaft and the tractor guide shaft.
Remove E-ring 6 from the tractor shaft.
Remove the right tractor, the paper support unit, and the left tractor from the tractor shaft and tractor
guide shaft.
(17)
Figure 3-27. Disassembling the Tractor Unit
3.2.5.15 Arranging the Cables
When you assemble the printer, arrange the cables as shown in Figure 3-28.
Printer ”Mechanism (Bottom)
Figure 3-28. Arranging the Cables
3-19