multipart forms 0.12 to 0.49 mm (0.0047 to 0.0192 inch)
Weig ht
single sheets 52.0 to 128 g/m² (14 to 34 lb)
multipart forms 40 to 58 g/m² (10 to 15 lb) (weight/part)
Quality
single sheets Plain paper and recycled paper
multipart forms Carbonless or back carbon multipart forms with spot
gluing or paper stapling on both sides
Multipart forms
The specifications for the dimensions of multipart forms are the same as those for single sheets and
continuous paper. See “Single sheets” on page 114 and “Continuous paper” on page 115 for
detailed information.
❏ The form sheets of continuous multipart forms should be securely joined together along the left
and right edges by crimping or, spot-gluing. For the best printing quality, use multipart forms
joined with spot-gluing.
spot-gluing crimping spot-gluing and crimping on
each side
1. 1 inch or less
2. 3 inches or less
3. printing side
4. 1 inch or less
5. 3 inches or less
!
Caution:
Never use continuous multipart forms that are joined with metal staples or bar-gluing.
LQ-690II/LQ-690IIN User’s Guide
Product Information 117
To Next Page
Loading...
