Moiré (Cross-Hatch) Patterns Appear in the Copied Image
If the original is a printed document such as a magazine or a catalog, a dotted moiré pattern
appears.
Solutions
Change the reduce and enlarge setting. If a moiré pattern still appears, place the original at a slightly
dierent
angle.
& “More Menu Options for Copying” on page 57
An Image of the Reverse Side of the Original Appears in the Copied Image
e following causes can be considered.
When scanning thin originals, images on the back may be scanned at the same time.
Solutions
Place the original on the scanner glass and then place a piece of black paper over it.
& “Placing Originals on the Scanner Glass” on page 33
The copy density setting is too high.
Solutions
Lower the copy density setting.
& “More Menu Options for Copying” on page 57
Solving Problems
>
Printing, Copying, and Scanning Quality is Poor
>
Copy Quality is Poor
127
To Next Page
Loading...
Need help?
General