What to do if my Epson Perfection 4870 Photo shows a FATAL ERROR?
If your Epson Scanner shows a FATAL ERROR, it could be due to several reasons: * The lamp might be dead. * The main unit could be faulty. * The firmware download might have failed. To resolve this, first, switch the power off. This will set Bit 7 of the status bit. Additionally, try switching the power off and then on again. You can also send the initialization command (ESC@).
General| I/O ports | USB 2.0/1.1, IEEE 1394 |
|---|---|
| Network ready | No |
| Dimensions (WxDxH) | 304 x 476 x 134 mm |
| Power requirements | AC100 - 120V, 50 - 60hz |
| Color scanning | Yes |
| Input color depth | 48 bit |
| Maximum scan size | 216 x 297 mm |
| Scanner type | Flatbed scanner |
| Sensor type | CCD |
| Minimum RAM | 128 MB |
| Minimum processor | Pentium / G3 |
| Compatible operating systems | Mac OS 8.6 - 9.x, OS X 10.2.x Windows 98 SE, Windows 2000 Professional, Windows Me, Windows XP Home / XP Professional |
| Bundled software | LaserSoft SilverFast SE 6, Adobe Photoshop Elements 2.0, ABBYY FineReader |
| Sustainability certificates | ENERGY STAR |
| Power consumption (typical) | 24 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Storage relative humidity (H-H) | 10 - 85 % |
| Operating relative humidity (H-H) | 10 - 80 % |
| Pallet width | 800 mm |
| Pallet height | 2225 mm |
| Pallet length | 1200 mm |
| Quantity per pallet | 30 pc(s) |
| Quantity per pallet layer | 6 pc(s) |
| Package depth | 590 mm |
| Package width | 235 mm |
| Package height | 415 mm |
| Package weight | 9372 g |
| Quantity per pack | 1 pc(s) |
| Country of origin | Indonesia |
Weight and Dimensions| Weight | 14800 g |
|---|
To Next Page
