Connecting to a Projector on a Network and Projecting
18
Projector control
While the projector is connected to the network, the
projector's A/V Mute, Switch PC source and Switch video
source functions can be controlled from both the Remote
Control and the projector's Control panel.
Click to display the following toolbar.
A/V Mute
The same function as the A/V Mute button on
the Remote Control.
Switch PC source
The Source alternates between Computer1,
Computer2, USB Display, USB, and LAN each
time you click.
Switch video source
The Source alternates between S-Video and
Video each time you click.S-Video does not
switch if the cable is not connected.
Screen Preview
Displays the multi-screen preview screen.
Click to display a preview with the settings you have
made. Click the displays to enlarge each Screen Preview to
full-screen.
Set options
Transmission performance during the transfer of computer
images can be adjusted.s p.39
Movie Sending Mode
Not enabled on this projector. The message "The connected
projectors do not support Movie Sending." is displayed.
Disconnect
Disconnects the connection to the projector.
To Next Page
Loading...
Need help?
General