Troubleshooting
62
When connected using EasyMP Network Projection, the screen does not refresh in an Office application.
Error message when starting up EasyMP Network Projection
Check Remedy
Is the mouse moved continuously? When you stop moving the mouse cursor, the screen is updated. If the screen does not update
quickly, stop moving the mouse cursor.
Error Messages Remedy
Connection to the projector failed. Try to connect again. If it still does not connect, check the network settings on the computer and the
network settings for the projector.
For details on the network settings to be made on the projector, see
The keyword does not match. Re-enter the keyword
displayed on the projector screen.
Check the Projector keyword displayed on the LAN standby screen, and enter the Projector keyword.
The selected projector is busy. Do you want to continue
the connection process?
You tried to connect to a projector that is connected to another computer.
When the Yes button is clicked, it connects to the projector. The connection between the projector
and the other computer is cut off.
When the No button is clicked, it does not connect to the projector.
The connection between the projector and the other computer is maintained.
EasyMP Network Projection initialization failed. Restart EasyMP Network Projection. If the message still appears, uninstall and then reinstall EasyMP
Network Projection.
s p.8
Connection failed due to keyword mismatch. When connecting to a projector for which a Projector keyword has been set, the wrong Projector
keyword is entered.
Check the Projector keyword that is displayed on the projector's connection standby screen. After the
connection is disconnected and then reconnected, enter the Projector keyword on the keyword entry
screen that is displayed.
s p.14
To Next Page
Loading...
Need help?
General