Using Set options
40
Adjust performance tab
Display Connection Mode
Selection window on
startup
Set whether or not the Quick Connection
Mode/Advanced Connection Mode
screen is displayed when EasyMP
Network Projection starts. Because this
projector always starts in Advanced
Connection Mode, clear this checkbox.
Search method on startup
Select from the following projector
search methods executed when EasyMP
Network Projection is started.
Automatic search on startup
Specify search method after startup
Search with the last network
configuration
Edit profile
The Edit profile dialog box is
displayed.s p.36
Switch LAN
Windows only
The Switch Network Adapter dialog box is
displayed. This is used when it is
necessary to switch the network adapter
to be used for a search when a computer
has multiple adapters.
By default, all of the network adapters are
used to perform a search. When a Wired
LAN is always used as the connection
method, select a Wired LAN adapter.
Restore Defaults
You can reset all adjustment values on
the General settings tab to their default
settings, except for Edit profile and
Switch LAN.
Performance adjustment
slider
The performance can be set to Fast,
Normal, and Fine.
Set to Fast when movie projections are
interrupted.
Transfer layered window
Windows only (excluding Windows Vista)
Set whether or not to transfer a layered
window.
The layered window is in use when
contents such as messages displayed on
the computer are not projected by the
projector. Select this checkbox to project
contents such as messages that use the
layered window.
Clear this checkbox if you do not want the
mouse pointer to flicker on the screen.
To Next Page
Loading...
Need help?
General