Epson PowerLite S5 Series User Manual

Setting Up the Projector 23
Playing Sound Through the Projector
You can connect a commercially available computer audio adapter
cable to take advantage of the projector’s built-in speaker. You can
obtain an audio adapter cable (3.5-mm stereo miniplug to two male
RCA plugs) from a computer or electronics dealer.
1. Connect the RCA plugs on the audio adapter cable to the
corresponding
L-Audio-R jacks on the projector.
2. Connect the other end of the audio cable to your laptop’s
headphone jack or audio-out jack, or your desktop’s
speaker or audio-out port.
If you don’t need to make any other connections, you can plug in
your projector and turn it on. See page 32 for instructions.
Connect audio
adapter RCA plugs

Epson PowerLite S5 Series Specifications

General

Resolution	800 x 600 (SVGA)
Contrast Ratio	400:1
Weight	2.7 kg (6.0 lbs)
Projection System	3LCD, 3-chip technology
Lamp Type	170 W UHE
Lamp Life	3000 hours (Normal Mode)
Zoom Ratio	1.35x
Projection Size	30" to 300"
Input Ports	Composite Video (RCA), S-Video (Mini DIN 4-pin), Audio (Stereo Mini Jack), VGA (HD D-sub 15-pin)
Output Ports	VGA (HD D-sub 15-pin)
Noise Level	37 dB (Normal Mode), 30 dB (Low Brightness Mode)