Epson PowerLite S5 Series User Manual

48 Using the Remote Control
Changing the Image’s Aspect Ratio
If you’re projecting a widescreen format image, you can use the
Aspect button on the remote control to change the aspect ratio.
Follow these steps:
1. Press the
Aspect button once to change the aspect ratio to 16:9
for widescreen format.
2. Press it again to return to 4:3 aspect ratio.
Changing Presentation Slides
You can use the remote control to click through slideshow-style
presentations (such as PowerPoint) from up to 20 feet away. This
gives you more flexibility, since you don’t need to stand near your
computer to change slides.
To change slides with the remote control, make sure you have
connected your computer to the projector with a USB cable as
described on page 21.
To advance slides in a PowerPoint presentation in Slide Show mode,
press the
Page up button on the remote control. Press the Page
down
button to go back a slide.
note
You must be projecting
component, composite, or
S-Video images to change the
aspect ratio.
You can also change the
aspect ratio using the
projector’s Signal menu. See
page 58 for details.

Epson PowerLite S5 Series Specifications

General

Resolution	800 x 600 (SVGA)
Contrast Ratio	400:1
Weight	2.7 kg (6.0 lbs)
Projection System	3LCD, 3-chip technology
Lamp Type	170 W UHE
Lamp Life	3000 hours (Normal Mode)
Zoom Ratio	1.35x
Projection Size	30" to 300"
Input Ports	Composite Video (RCA), S-Video (Mini DIN 4-pin), Audio (Stereo Mini Jack), VGA (HD D-sub 15-pin)
Output Ports	VGA (HD D-sub 15-pin)
Noise Level	37 dB (Normal Mode), 30 dB (Low Brightness Mode)