Epson PowerLite S5 Series User Manual

46 Using the Remote Control
Turning Off the Picture and Sound
Press the A/V Mute button on the remote control or use the A/V
Mute
slide on the projector to turn off the image and sound and
darken your screen. This is useful if you want to temporarily re-direct
your audience’s attention without the distraction of a bright screen.
■ To turn off the picture and sound, press the A/V Mute button or
close the
A/V Mute slide on the projector. The screen goes dark.
■ To turn the image and sound back on, press the button again, or
open the
AV Mute slide.
You can create an image, such as a company logo or a picture, to
display on the screen whenever you press the
A/V Mute button. See
page 67 for more information.
Stopping Action
Press the Freeze button to stop the action in your video or computer
image and keep the current image on the screen. The sound will
continue, however. Also, because the source continues to transmit
signals, you won’t resume the action from the point you paused it.
Press the
Freeze button again to restart it.

Epson PowerLite S5 Series Specifications

General

Resolution	800 x 600 (SVGA)
Contrast Ratio	400:1
Weight	2.7 kg (6.0 lbs)
Projection System	3LCD, 3-chip technology
Lamp Type	170 W UHE
Lamp Life	3000 hours (Normal Mode)
Zoom Ratio	1.35x
Projection Size	30" to 300"
Input Ports	Composite Video (RCA), S-Video (Mini DIN 4-pin), Audio (Stereo Mini Jack), VGA (HD D-sub 15-pin)
Output Ports	VGA (HD D-sub 15-pin)
Noise Level	37 dB (Normal Mode), 30 dB (Low Brightness Mode)